The installation of Amtico is straightforward and follows the same guidelines that apply to all quality resilient tile floors. Good preparation is essential for a trouble-free installation. Amtico can be laid on concrete, timber, stone and many other sub-floors, which have been suitably prepared. Site conditions must comply with the relevant national regulations.
Amtico is not suitable for external installation or unheated locations but it can be used with under-fl oor heating providing it is switched off for 48 hours before and after laying (the maximum permitted surface temperature is 27°C/81°F). We recommend that the installed floor should not be allowed to cool below 13°C during its service life.
Tiles, adhesive and sub-floor must be allowed to stabilise to a consistent temperature between 18°C and 27°C (64°F and 81°F) for a period of 24 hours before and after installation. Tiles must be stored flat.
Following installation, Amtico should be protected from heavy traffic for 24 hours and must not be washed for 48 hours. Always follow other manufacturers’ recommendations when using their proprietary materials for sub-floor preparation.
.
No comments:
Post a Comment